CPLD/FPGA Digital Logic Circuit Design Experiment Kit

Introduction

Nowadays, CPLD and FPGA have been the first-choice components for the designers. It is suitable for the designers on application for communication, industrial automation, intelligent instrument, image processing, extensive engine control, etc. In order to allow users have excellent experimental platforms, LEAP series has provided platforms based on Altera or XILINX. Enabling engineers to realize the designs of logical circuit from experimental units.

Test Content Combined logic design, simulation and test

1. Basic logic
2. Deducter
3. Decoder
4. Combined logic
5. Comparator
6. Multiplexer
7. Adder
8. Compiler
9. Demultiplexe

1. Flip-flop device
2. Shift register
3. Shift counter register
4. Synchronized counter
5. Non- Synchronized counter

1. A/D converter
2. D/A converter

Thematic Application Test

1. 8 × 8 dual color spot array LED control test.
2. Digital clock
3. Counter
4. Electronic alarm clock
5. Traffic light control
6. Electronic dice
7. Keyboard scan
8. LCD display control test
9. A/D, D/A converter test
10. Easy CPU design
11. VHDL/AHDL voice design
12. Matching 8051 thematic test

Specification

• Communication: USB or Printer Port
• Power: 100V AC~240V AC
• Frequency Range: 50/60 Hz
• Dimension: 32cm x 22.6cm x 3.0/8.5cm
• Weight: 3.5Kg
• Operating Altitude: up to 5000 m
• Operating Humidity: 90％ (non-condensing)
• Temperature: +5℃ ~ +45℃

Other Specifications

• Chip Supported:
  • ALTERA: FLEX10K10TC144 (TQFP-144) / FLEX10K30ATC144 (TQFP-144)
  • XILINX: XCS10TQ144 (TQFP-144) / XC2S30PQ208 (PQFP-208) / XC2S100PQ208 (PQFP-208) / XC2S300EPQ208 (PQFP-208)
• Signal Generation Unit:
  1. Programmable frequency generator
  2. Standard frequency 1K/10K/ 100K/1M/10MHz
• Logic Input Switch:
  1. 8 × 1 logic input original press point with light
  2. 8 × 2 logic input Dip switch
  3. 4 impulse press button generator (2 positive pulse; 2 negative pulse)
  4. 3 × 4 array keyboard
• Output Unit:
  1. 8 × 8 dual color point array LCD display
  2. LCD 16 × 2 monitor
  3. 6 digits 7 nodes monitor
  4. 3 × 4 LED output
  5. Buzzer output x 1 set
• Linear Unit:
  1. 8bit D/A converter x 2 sets
  2. 8bit A/D converter x 1 set
• MPU unit:
  • 8051 and CPLD/FPGA match circuit test

• Operating System: Refers to the original CPLD / FPGA software install requirement.

Standard Accessories

• Main unit x1
• CD x1 (included Altera Baseline V9.23 driver)
• AC power cord x1
• 25-pin printer cable or USB cable x1

visit Leap Electronic for further details

download brochure