New replacement LCR Lead Set

• A superb new extra long (275mm) coax lead set for the Atlas LCR featuring gold plated 2mm sprung banana plugs. Supplied with stunning new hook probes that fit securely to the new lead.
• This new lead set allows a wide range of new 2mm compatible probes to be fitted easily and securely

MN21 / GP23 Alkaline Battery (12V)

• Replacement alkaline batteries for all our current analyser products. These batteries are of the highest quality and have been chosen to provide excellent life together with superb leak resistance.
• Batteries measure 28.5mm x 10mm dia.

Gold Plated LCR Croc Set (2mm sockets)

• A pair of very high quality croc clips designed for the new 2mm LCR plugs. The sockets are superb quality, gold plated and compatible with industry standard 2mm banana plugs. These fit easily and securely to the 2mm LCR plugs.
• Supplied with fitting and probe compensation instructions.
• These crocs are not compatible with 0.63mm square pin socket connectors.

New replacement ESR Lead Set

• A superb new extra long (460mm!) lead set for the Atlas ESR and Atlas ESR PLUS featuring our new gold plated 2mm sprung banana plugs. Supplied with gold plated crocs that fit securely to the new lead.
• This new lead set allows a wide range of new 2mm compatible probes to be fitted easily and securely

ESR Gold Needle Probes (2mm sockets)

• A pair of extremely sharp gold plated probes, primarily designed for the Atlas ESR and Atlas ESR PLUS. These gold needles feature our new standard 2mm sockets, allowing them to be fitted to industry standard 2mm banana plugs. Even the 2mm sockets are gold plated.
• Each probe is 90mm long, is fully insulated except for the 13mm sharp gold needle. These are VERY sharp and care must be used! The needles can be bent with rough treatment.
• ESR unit must be fitted with 2mm plugs to be used with these probes.

ESR Gold Prods (2mm sockets)

• A pair of stunning gold plated prods, primarily designed for the Atlas ESR and Atlas ESR PLUS. These gold prods feature our new standard 2mm sockets, allowing them to be fitted to industry standard 2mm banana plugs. Even the 2mm sockets are gold plated.
• Each prod is 85mm long, is fully insulated except for the 5mm sharp gold tip. The slender design is ideal for reaching tricky parts of equipment whilst maintaining maximum safety and control.
• ESR unit must be fitted with 2mm plugs to be used with these probes.

Non-Identified Terminator for Atlas IT

• Replacement for your lost or damaged terminators
• Identical to the ones normally supplied with the Atlas IT Network Cable Analyser, they provide all the cable testing and connection pattern functions.

Cat-5 Patch Cable (single)

• A high quality CAT 5/5e/6 Gigabit patch cable for use with the Atlas IT to enable network socket testing.
• The cable is complete with moulded ends and comprises of 8 flexible stranded cores, ideal for long life in the testing environment. The cable fits neatly in the standard Atlas IT carry case.
• Total length of cable is approximately 300mm (12").
• Sold individually (not a pair as pictured).

RJ45 Breakout Adapter

• A useful adapter that enables testing and analysis of network cables that have not been terminated with a plug or socket.
• Also useful for testing and prototyping non-standard connection configurations.
• Supplied with gold plated crocodile clips and high quality strain relief on all joints.
• Cable is stranded for extra flexibility.

LCR Surface Mount Tweezers (2mm sockets)

• A pair of very high quality SMD tweezers designed for the new 2mm LCR plugs. These tweezers are superb quality, with gold plated tips and compatible with industry standard 2mm banana plugs. These fit easily and securely to the 2mm LCR plugs.
• The gold tips can touch together which means they are suitable for even the smallest parts (smaller than 0402s for example). Additionally, the tips can open wide enough for very large SMD parts (such as Case D tantalums or even larger).
• Supplied with fitting and probe compensation instructions.
• Tweezers are not compatible with 0.63mm square pin socket connectors.

Premium Probe Set for Atlas DCA/SCR

• Fabulous tough probes for the Atlas DCA and the Atlas SCR. Note that the Atlas DCA and SCR are now supplied complete with these fitted probes.
• The cables are extra-flex type of 160mm (6") length and 2.0mm overall diameter. These premium probes are gold plated with an overall body length of 48mm (1¾").
• Cable ends are pre-tinned for easy fitting to your analyser.
• Supplied as a set of Red, Green and Blue.

USB Type A to Mini 5 Pin Cable

• A high quality cable terminated with a Type A USB plug and a Mini 5-pin plug.
• Ideal for many applications such as digital cameras and, of course, our Eddi Data Logger.
• Overall length is 2m (about 6'6''). Supplied in a sealed packet.