SERIES 4
The HD-4 has all of the most needed features in a low cost craft-grade design. Extremely rugged and reliable, the HD-4 model is THE value leader in basic craft-quality testsets.

HD 630 LINEMAN'S TEST SET

• At the top, the Series 630 was designed for operators and installers who care about the satisfaction of their customers. Providing high quality service requires no interruption of data signal and no confusion between analog and digital lines when monitored by the technicians.

•To accomplish this, the Series 630 is equiped with a « SIGNALSHIELD™» fea ture which detects high frequencies and alerts the technician in the monitor mode. In case high frequencies (digital/inaudible spectrum) are detected, a red LED lights up and a timed (3 seconds), warning tone is emitted to alert the user of a data signal presence on the line.

Series 6 BL /Local Battery

Intended for communication and testing over dead (non-powered) wires, this test set has two main applications :
• Local battery operation : Due to its 4 AA batteries, the unit is able to generate ringing current and to provide a talk mode communication linkwith a second Series 6BL connected at the other end.
It is perfectly suited for providind stand by or security communication (field installations, fire stations, hospitals, job sites, camping, etc). It is also a good solution when radio communication is no longer working or forbidden for security reasons.
• Cable tracing : Each unit includes a tone generator. The signal is applied to the line with a third wire and it can be detected and identified at the other end through the adjustable loudspeaker of another Series 6BL connected at the other end of the cable. Detection is also possible by any other est set operating in “Monitor mode”.
• The combination of both operations, local battery communication and cable tracing plus long battery life and rugged construction make the Series 6 BL an ideal tool for splicer's, installers and technicians working in teams.
• The Series 6BL comes with a carrying pouch and headset to allow hands-free use.

TCT-1900-RD Lineman's Test Set

Offer the lastest in integrated circuit design, provide the industry standard packed with popular features. Talk/Ring/Monitor three kind of tests function, its switch located on inside of handgrip. Switchable tone or pulse dialing. TONE/PULSE switch are located on inside of handgrip. The Hi impedance monitor will not disturb data, conversation, or signaling. LED indicates reversed polarity. Last number redial(31 digits maximum).

ST230 INTELLIGENT LINE TESTER

ST230 Intelligent Line Tester is a new type of portable and intelligent line fault tester, which adopts some advanced technologies such as intelligent CPU, IC and SMT machine, human design style, and especially integrates various kinds of functions such as CID, line performance test, secure line test (remote power checking) to be the one.

SIEMEN CORNING ( BLUE)

Corning Termination Tool used in telecommunication to position the wire into appropriate terminal slot

SIEMEN RED

Corning Termination Tool used in telecommunication to position the wire into appropriate terminal slot

NORTHERN TELECOM QTH 38b

QTH38B tool used for terminating, bridging, and removing wires from 2-beam or 3-beam, insulation-slicing, quick-clip terminals found on QCM486(MPC) and 391Q connectors, and on Versablocks with quick-clip pins

QUANTE-POUYET

3 in 1 Modular Crimping Tool
LTSS-TLCP-M02.

LTSS-TLCP-M02 Crimp wire into RJ45 connector

80 PIECE LAN/WAN Installer's Kit

A complete networking tool kit for LAN/Home networking, ISDN and broadband installtion.